My unit is based on foreign equipment, optimized the development of combined separator. The device mainly by the automatic system, container, lifting stirring system, a discharging device, frame, fan, cyclone dust collector, a water bath dust composition of mixture.

working process：

Grilled out of the furnace heat aluminum aluminum ash slag into the small car, through automatic feeding device filed into the container, open lifting stirring system is fully stirred, aluminum liquid separation sink to the bottom of the container, by feeding device is discharged into the aluminium ingot mould forming aluminum ingots, alumina and impurities by the upper row of ash outlet discharge, stirring harmful gas generated in the process and float the fan into the cyclone to collect dust, exhaust gas purification by water bath dedusting treatment before being discharged into the atmosphere, so as to meet the requirements of environmental protection.

The advantages of aluminum ash separator:

The equipment investment is small, the amount of treatment: an investment of more than 40 thousand of the equipment per hour processing capacity of 1.5-1.8 tons.

The production cost is low: one equipment only needs 2 people to operate.

High recovery rate: the metal recovery rate of the equipment can reach more than 98%.

The pollution: the traditional method using stone roller or ball mill grinding after the vibration sieve, high labor intensity, occupied much of artificial pollution. The equipment uses an external dust removal device, fully meet the environmental requirements.

The production process is simple, the equipment only uses the raw material into the host, by the host processing aluminum ash and aluminum particle can be isolated into separation equipment and intermediate links without manual operation, saving time and labor, the production process is simple, easy to operate.

Processed aluminum particles can be used directly for smelting. Aluminum ash can be used to produce aluminum chloride series of water purification materials, to make the best use of scrap recycling. Or use the treated aluminum ash as a substitute for the raw material of the electrolytic aluminum.